Wide Area Network

ADSS Fiber Optic Cable, 9/125um G652D

fiber optic cable

Customized Fiber Optic Cable

Premium Line dedicated fiber optic technical team capable to design various telecom systems cables for you base on requirements or provided location climate information where intend to use.

All Dielectric Self Supporting Fiber Optic Cable 

This kind of cable more often be installed on overhead power lines, gantries or poles, its’ all dielectric construction protect it against electric shock impact or damage.
Normally, you can provide us the local climate information also the electrical field strength to design it accordingly.

Cable Physical / Environmental Performance
Maximum Span100 meters
Cable Sag (%)1.0%
Temperature Range-20 °C to +70 °C
Worst Environmental Conditions100 kms/hr wind speed (No Ice)
Cable Characteristics
Maximum Working Tension (No Fiber Strain)4.12 kN (420 kgs)
Estimated Tensile Strength10.3 kN (1050 kgs)
Thermal Coefficient of Expansion20.83×10 -6 °C
Area of Aramid4.5 mm²
Approx. Cable Weight120 kgs/km
Cable Diameter12.2 mm
Radial Thickness of Sheath1.5 mm
Minimum Bending RadiusDynamic 700 mm, Static 350 mm
Crush Resistance2000 N/10 cm
Water PenetrationNo water penetration of the cable core, on a 3 meter sample, with a 1 meter head of water applied for 24
 hours
Outer Sheath MateriaHDPE (non anti-tracking)
Max. Electrical Field Strength≤ 12 kV/m tested according to IEEE P1222

Environmental Condition and Cable Loads, Sags, etc.

ConditionTempWind km/hrCable Load kgs% UTSSag (mtrs)Blow Out
 Angle
Cable Elong
 %
VertPlane
EDS25-15014%1100.212
Low Temp, No Wind0-18418%0.810.8100.203
High Temp, No Wind70-11311%1.331.3300.233
Low Temp, Wind010029428%0.512.5578.40.358
EDS Temp, Wind2510027326%0.552.7478.40.386
High Temp, Wind7010027924%0.6378.40.426

ADSS Fiber Optic Cable, 9/125um G652D

Number of Fibers1224487296144
Part No.260223012260223024260223048260223072260223096260223144

Figure 8 Fiber Optic Cable, 9/125um G652D

fiber optic cable

This kind of cable use upper messenger wire to support aerial cabling. It is designed for places with heavy wind weather or even ice frozen climate. The cable requires specified working load tension design to provide capable construction and mechanical characteristics to afford outdoor vile condition.
Normally, it’s recommended to use ITU-G652D fiber for data transmission, other mode upon request, as well as the outer sheath.
Normally, you can provide us the local climate information also the worst wind speed to design it accordingly.

Technical Parameters

ParameterUnitsValue / Details
Fiber Type-ITU-T G652D
Fiber Count-4, 6, 12, 2448
Cable Diametermm9.6 Dia. × 17.0 High.10.5 Dia. × 18.5 High.
Messenger Wire Diamm7 × 1.07 × 1.2
Cable Weightkg/km162200
Web Dimensionsmm2.0 Dia. × 2.0 High.
Cable Sheath, Radialmm1.5 Nominal
Messenger Sheath, Radialmm1.2 Nominal
Bending
 Radius
Dynamic-≥ 20 × Cable Diameter
Static-≥ 10 × Cable Diameter
Maximum SpanmSpan ≤ 100m
Cable Sag%Sag ≥ 1.0%
Max. Wind Speedkm/h100 (No Ice)
Max. Working Load (MAT)kN3.534.2
Ultimate Tensile Strength (UTS)kN8.0811.6
Crush ResistanceN/10 cm1500
Impact ResistanceNm3Nm with striking surface radius of 10mm
Operational Temperature°C-20°C ~ +70°C
Shipping Lengthsm4000 ± 5%

MAT = Maximum allowable tension, or maximum working tension (worse environmental conditions) and fibers have zero fiber strain. UTS = Approx. Breaking strain of the cable

Figure 8 Fiber Optic Cable, 9/125um G652D

Number of Fibers1224487296144
Part No.269222012269222024269222048269222072269222096269222144

Outdoor Parallel Steel Wires & Steel Armored Uni-tube Fiber Optic Cable

Outdoor Parallel Steel Wires

Two parallel steel wires construction cable suits for aerial installation. With additional corrugated steel tape protection make it also available for duct installation.



Structure & Environmental Characteristics

Loose TubeMaterialPBT
Peripheral Strength MemberMaterialSteel Wire
Diameter1.0 mm
WrappingMaterialWaterproof Tape
Messenger Wire DiaMaterialCorrugated Steel Tape
SheathMaterial / ColorPE / Black
Operating Temperature-40°C ~ +60°C
Storage / Transport Temperature-50°C ~ +70°C
Installation Temperature-10°C ~ +50°C

Mechanical Characteristics

Fiber
 Count
Outside Diameter (mm)Cable Weight (kg/km)Tensile Load (Min.)Crush LoadBend Radius
Short Term
 (N)
Long Term
 (N)
Long Term
 (N)
Static
 (mm)
Dynamic
 (mm)
Dynamic
(mm)
48.7821500600100030010D20D
68.7821500600100030010D20D
88.7851500600100030010D20D
128.7901500600100030010D20D
249.81311500600100030010D20D

Compliant Standard:ITU-T G651 / ITU-T G652 D, ANSI/TIA B.3, IEC-794

Outdoor Parallel Steel Wires & Steel Armored Uni-tube Fiber Optic Cable, PE

Number of Fibers9/12550/12562.5/12550/125(OM3)50/125(OM4)
4267123004267133004267113004267143004267193004
6267123006267133006267113006267143006267193006
8267123008267133008267113008267143008267193008
12267123012267133012267113012267143012267193012
24267123024267133024267113024267143024267193024

Outdoor Steel Armored Multi-tube Fiber Optic Cable

Outdoor Steel Armored Multi-tube Fiber Optic Cable

Install the fiber optic cable inside of existed conduits, this need excellent tensile strength also additional steel tape armored against rodent. This kind of fiber optic cable is also available for campus cabling.




Structure & Environmental Characteristics

Loose TubeMaterialPBT
Strength MemberMaterialSteel Wire
MaterialCorrugated Steel Tape
Moisture BarrierMaterialJelly Compound
SheathMaterialPE / Black
Operating Temperature-40°C to +70°C
Storage/Transport Temperature-40°C to +70°C
Installation Temperature-40°C to +70°C

Mechanical Characteristics

Fiber 
Count
Outside 
Diameter 
(mm)
Cable 
Weight 
(kg/km)
Tensile LoadCrush LoadBend Radius
Short Term
(N)
Long Term
(N)
Short Term
(N)
Long Term
(N)
Static
(mm)
Dynamic
(mm)
49.21031500600100030010D20D
89.21031500600100030010D20D
129.21031500600100030010D20D
249.21031500600100030010D20D
72111461500600100030010D20D
14415.52481500600100030010D20D

Compliant Standard:ITU-T G651 / ITU-T G652 D, ANSI/TIA B.3, IEC-794

Outdoor Steel Armored Multi-tube Fiber Optic Cable

Number of Fibers9/12550/12562.5/12550/125(OM3)50/125(OM4)
4265223004265233004265213004265243004265293004
8265223008265233008265213008265243008265293008
12265223012265233012265213012265243012265293012
24265223024265233024265213024265243024265293024
72265223072265233072265213072265243072265293072
144265223144265233144265213144265243144265293144

Outdoor Steel Armored Double Sheath Multi-Tube Fiber Optic Cable

Outdoor Steel Armored Double Sheath Multi-tube Fiber Optic Cable

The two layer sheath provides good crush resistance performance, as well as the good mechanical and temperature performance. It performs excellent water resistance and moisture resistance especially in the direct buried application or conduit cabling.


Structure & Environmental Characteristics

Loose TubeMaterialPBT
Peripheral Strength MemberMaterialSteel Wire
DiameterNom. 2.0 mm
ReinforcementMaterialCorrugated Steel Tape
WrappingMaterialAluminium/Corrugated Steel Tape
SheathMaterialPE / Black
Operating Temperature-40°C to +70°C
Storage / Transport Temperature-40°C to +70°C
Installation Temperature-40°C to +70°C

Mechanical Characteristics

Fiber
 Count
Outside
Diameter 
(mm)
Cable 
Weight 
(kg/km)
Tensile LoadCrush LoadBend Radius
Short Term
 (N)
Long Term
 (N)
Long Term
 (N)
Static
 (mm)
Static
(mm)
Dynamic
 (mm)
412.8189300010003000100012.5D25D
812.8189300010003000100012.5D25D
1212.8189300010003000100012.5D25D
2412.8189300010003000100012.5D25D
7214221300010003000100012.5D25D
14418.6343300010003000100012.5D25D

Compliant Standard:ITU-T G651 / ITU-T G652 D, ANSI/TIA B.3, IEC-794

Outdoor Steel Armored Double Sheath Multi-tube Fiber Optic Cable

Number of Fibers9/12550/12562.5/12550/125(OM3)50/125(OM4)
4266223004266233004266213004266243004266293004
8266223008266233008266213008266243008266293008
12266223012266233012266213012266243012266293012
24266223024266233024266213024266243024266293024
72266223072266233072266213072266243072266293072
144266223144266233144266213144266243144266293144

Fiber Optic Dome Type Splice Enclosure

541242402
541242402

Premium Line fiber optic dome type splice enclosure is in hermetically sealed design, easy for assembly and re-entry. The closure is designed with a gasketed split end plate for mid-access cable application and includes an integrated stack storage basket. Max. 6 * 24 cores splice trays support up to 144 cores splice inside and no need special tools for trays fixing or unloading. This type enclosure is available for aerial or wall mount application.

FEATURES:

  • Reliable mechanical sealing to prevent liquid or steam penetration 
  • Easy to open and reopen 
  • Available 2in 2out and 3in 3out types
  • Splice tray capacity: 24cores
  • 2 in 2 out type up to 72 cores, 3in 3out type up to 144 cores 
  • Made by high strength engineering material to against impact or hit

Fiber Optic Dome Type Splice Enclosure 

PART NO.DESCRIPTION
541122402Premium Line FO Splice Closure, w/4 Cable Ports (2in, 2out), 48 Cores, Dome Type
541132402Premium Line FO Splice Closure, w/4 Cable Ports (2in, 2out), 72 Cores, Dome Type
541242402Premium Line FO Splice Closure, w/6 Cable Ports (3in, 3out), 96 Cores, Dome Type
541262402Premium Line FO Splice Closure, w/6 Cable Ports (3in, 3out), 144 Cores, Dome Type

Fiber Optic Inline Type Splice Enclosure

542222402
542222402

Premium Line fiber optic inline type splice enclosure is in hermetically sealed design, easy for assembly and re-entry. The enclosure is in compact and water-tight design, provides good impact and low temperature resistance for wide applications. Max. 8 * 24 cores splice trays support up to 192 cores splice inside and no need special tools for trays fixing or unloading. This type enclosure is available for aerial duct and direct buried.

FEATURES:

    • Comply to IEC 1073-1:1994 test requirements
    • Reliable mechanical sealing to prevent liquid or steam penetration
    • Easy to open and reopen
    • 6 cable entry ports (3in, 3out) for cable diameters of 23 mm(2), 20 mm(2), 16 mm(2)
    • Splice tray capacity: 24cores
    • Maximum number of splice trays: 8
    • Dimension: up to 96cores, 450 × 216 × 110mm; up to 192cores, 450 × 216 × 160 mm
    • Suit for areial, duct and direct buried application

    Fiber Optic Inline Type Splice Enclosure

    PART NO.DESCRIPTION
    542222402Premium Line FO Splice Closure w/6 Cable Ports (3in, 3out), 48 Cores
    542232402Premium Line FO Splice Closure w/6 Cable Ports (3in, 3out), 72 Cores
    542242402Premium Line FO Splice Closure w/6 Cable Ports (3in, 3out), 96 Cores
    542262402Premium Line FO Splice Closure w/6 Cable Ports (3in, 3out), 144 Cores
    542282402Premium Line FO Splice Closure w/6 Cable Ports (3in, 3out), 192 Cores